XCT-1™    Fire Retardant Coating and Insulator

This great product has been in the making for eight years.  Tests by Universal Protective Technologies' labs show XCT-1™ to be a Class A coating meeting Class 1 and 2 ratings, and is the most practical solution to insulating against high temperature and flame. XCT-1 exceeds fire rated gypsum board properties, as well as Monokote.  Our product is light weight, and more accessible where sheet rock is difficult to set.

XCT-1 is an organic and inorganic based thermal product with NO EPA ISSUES and NO ASBESTOS.

XCT-1 is a light weight product yet superior in performance and easy to apply. Property test ASTM E-605, E-760 Passes, E-759 Passes. Flame spread 5, Smoke Dev. 0. Shelf life 2 years in dry area. Temperature conductivity ASTM C-447 from 100F degrees to 1800F degrees.

Developed for the building trade to assist the National Fire Codes now in force.  XCT-1™  can help reach the 1 hour and 2 hour ratings or more as required by code enforcement in many areas. 

Excellent qualities for ceilings, walls, between floors and steel beams.  Can be applied on sheet rock, galvanized steal, iron and most surfaces.  An organic textured application that can be left as is or painted after application.
Recommended for Commercial and Industrial use.  This unique product can also be used as a fire stop compound for penetration holes.

APPLICATIONS: COMMERCIAL, INDUSTRIAL AND RESIDENTIAL An exclusive formula flame and heat inhibiting compound. A SUPERIOR GRADE. Thermal High Heat coating rated Class "A", Class I & 2. Specifically formulated for maximum protection on ceilings and walls, steel beams and tank insulation where high fire and heat resistance is required. INTERIOR applications, meets and exceeds the surface burning characteristics for applied coatings. Can be applied to porous and non-porous surfaces. For other uses contact your distributor or corporate office. A system to achieve 1 and 2 hour ratings. Because it can be applied on most surfaces and hard to reach areas.

This product is sold as a dry mix with a current additive in large and small quantities. One bag of XCT-1 will produce 7.5 gallons of material. For large projects dry weight in 40 lb. bags or fiber containers.
Spread rate:  Spread rate will depend on the measure of fire protection desired.  Example, 1/8" = 30 Minutes 1/4"= 1 hour .  1/2" or more = 2 hours.  Heavier the coating higher the insulating factor.  Spread rate: 1/4" approx. 40 sq. ft. to 50 sq. ft. per bag of dry mix depending on thickness of application.

Applied by hopper, rotor pump, plaster or texture pump systems, typical for ceiling and wall textured compound applications.  Can also be applied by hand trowel.

Click the PDF file above for more info...